Fiber Fusion Splicer Fusion Failure Analysis

When we use the fiber optic fusion splicing machine, we will encounter various problems, which makes fusion failture. What is the reason? We will analyze the reasons for this phenomenon for you.

1. Fusion splicer itself problem

2. Fiber reason, the end face of the fiber may be uneven or angled.

3. The high voltage discharge may be abnormal or the electrode needle is too dirty.

4. The V-groove and the presser foot where the optical fiber is placed are dusty.

5. After the optical fiber fusion splicer has been used for a period of time, the ambient temperature has a particularly large change. It needs ARC calibration.

6. The splicing mode of the fusion splicer is wrongly selected.

The above is the analysis of the reasons why the fusion splicer has been failed. When such problems occur, you can try to check according to the above method. If not, you need to find after-sales personnel for further investigation.

Shinho fiber Communication Company is a high-tech enterprise certified by ISO9001 quality management system, specializing in providing various optical fiber processing solutions. With a rich product line, the current products include drop cable fiber fusion splicer, 6 motor trunk line fusion splicer, ribbon fiber fusion splicer, polarization maintaining fiber fusion splicer, multi-core fiber fusion splicer, large diameter fiber fusion splicer, large diameter fiber cleaver, OTDR, optical power meter,light source, etc. The products are all independently developed and have complete intellectual property rights. For more details, you can visit www.xhfiber.com.