• 2020-06-28

The SOC Solution More recently, splice on connectors (SOC’s) were developed to address the cable management and space considerations of connectorized pigtails. Instead of a long pigtail, the body of t...

• 2020-07-10

What is the difference between mirror design and without mirror design for a fusion splicer? Currently fusion splicers have two types structures for fiber imaging. One is with reflective mirror design...

• 2020-07-31

When the fiber core is so small that only light ray at 0° incident angle can stably pass through the length of fiber without much loss, this kind of fiber is called single mode fiber (SMF). The basic ...

• 2020-09-07

Thermal Stripper--- Ideal tool for ribbon fiber splicing work Optical fiber is a light transmission tool based on the principle of total reflection of light in the fiber made of glass or plastic. It i...

• 2020-09-23

The rapid development of photonic technologies has created the need for sophisticated optical products well outside the "telecom standards." User requirements and specifications for these photonic com...

• 2020-10-30

The purpose of using polarization-preserving optical fiber around the loop is to improve the measurement accuracy of the system. Under the condition of the same fiber length and fiber ring diameter, t...

• 2020-11-06

As we all know that fiber cutting is the prerequisite and basis for fiber fusion splicing and fiber endface processing. Conventional communication optical fibers can be processed with ordinary cleaver...

• 2020-11-12

From Sumitomo starts the first fusion splicer in 1980’s, it has been around 40 years now and arc fusion splicing plays an important role in the installation of modern fibre networks and FTTH. (Fibre t...

• 2020-11-19

SHINHO S-12 PM fiber fusion splicer SHINHO S-12 PM fiber fusion splicer is new developed by Shanghai Xianghe Fber Communication Co., Ltd in China, it is the first manufacturer in China who develops th...