Categories
New Products
LDC-100 Large Diameter Optical Fiber Cleaver * Applicable to cladding diameter 80μm~1250μm fibers * Vacuum pump V-groove convenient to put fiber * Durable blade, lifetime more than 20000 times * Data storage 4000 groups * User friendly GUI menu, easy to operate more
S-22 Multi-Core Fiber Fusion Splicer The 1st Fully Automatic Multi-core Fiber Fusion Splicer in China more
Polarization Maintaining (PM) Fiber Fusion Splicer S-12 *Suitable for SM/MM/PM fibers splicing * Core to core alignment, low splicing loss * Endview and Profile observation and alignment * Arc automatic calibration and splicing * PM fiber 45 and 90 degree alignment * Applicable to variety fibers splicing, such as Panda ,bow-tie and elliptical fiber more
S-37 LDF Speialty Fiber Fusion Splicer SHINHO S-37 is the latest model we developed, it could splice fiber cladding diameter from 125 to 680μm with low splice loss. We equipped the machine with 3 different fiber holders, and 2 pairs of spare electrodes. more
Core to Core Alignment Fiber Fusion Splicer X900 Six motors fusion splicer, real core to core alignment technology. Typical splicing time: 6-12 seconds, fast splicing 6 seconds Typical heating time: 18s heating, identify fiber types automatically. Typical splice loss:G651: 0.01dB; G652: 0.02dB; G653: 0.04dB; G654: 0.04dB; G.655:0.04dB; G657:0.02dB. Battery Capacity: 5200mAh Li-battery, typical 300 cycles splicing and heating. Used for WAN/ MAN/ Telecommunication projects. more
Robust Multi Function ARC Fusion Splicer S16 76cm dropping anti-shock, IP5X dustproof and IPX2 water resistant Touch screen display, combined with keypad operation Multi function holder for bare fiber, patch cords, drop cable etc. Fast splicing and heating, automatic ARC calibration. more
SHINHO X-18 Ribbon Fiber Thermal Stripper Shinho X-18 Thermal Stripper is a newly developed hand-held thermal stripper, specially designed for nondestructive thermal stripping of the jacket of ribbon cable up to 12 fibers. A good and reliable tool for ribbon fiber splicing work. more
High Precision Fiber Optic Cleaver X-50D Small size& light weight, easy to operate. High precision and stable performance. More than 48000 time blade life,fiber cleaved length 5~20mm. High quality material more
Outdoor Fiber Optic Installation: Small Details Matter
Many people think fiber optic installation is only about fusion splicing, but outdoor work is very different from working in a workshop. Wind, dust, temperature, and small handling mistakes can all affect the final splice quality.
Before starting, always check your equipment carefully. Make sure the fusion splicer, cleaver, and battery are in good condition. A small equipment issue on-site can easily delay the entire project.
The working environment is also important. Strong wind can affect fiber alignment and arc discharge during splicing, so experienced technicians usually work in sheltered areas or use simple wind protection.
Fiber cleaning and cleaving are two of the most critical steps. The fiber should be cleaned with alcohol and lint-free wipes in one direction only. A poor fiber end face, cracks, or dirt can directly increase splice loss and create problems during OTDR testing.
During splicing, keep the fibers straight, clean, and properly aligned. Even though modern fusion splicers show estimated loss values, technicians should still visually check for bubbles, black spots, or abnormal deformation.
After splicing, proper heat shrink protection and fiber routing are equally important. Excessive bending is one of the most common causes of fiber failure after installation.
Safety should never be ignored during outdoor work. Never look directly into an active optical port, and always clean up fiber scraps carefully to avoid injury.
Good fiber installation is not about working fast — it is about working carefully. Attention to small details is what creates stable and reliable fiber links.
As a professional fiber optic solution provider, Shinho Optics is committed to delivering reliable and high-performance fiber handling equipment for global customers. From fusion splicing to fiber processing solutions, we provide the tools and support you can trust. Choose Shinho Optics for more professional and efficient fiber optic work.
Welcome to register the newsletter if you have any interest in our products, we will keep you informed of our news, products information and promotions if there is any.
© Copyright: SHINHO OPTICS LIMITED All Rights Reserved.
English
français
русский
italiano
español
português
العربية
ไทย
हिन्दी
Indonesia
中文
