• 2020-06-28

The SOC Solution More recently, splice on connectors (SOC’s) were developed to address the cable management and space considerations of connectorized pigtails. Instead of a long pigtail, the body of t...

• 2020-07-01

Demand for increased bandwidth and the resulting growth of ribbon fiber cabling in network installations has resulted in a greater need for solutions that facilitate fast and effective fiber network m...

• 2020-07-10

What is the difference between mirror design and without mirror design for a fusion splicer? Currently fusion splicers have two types structures for fiber imaging. One is with reflective mirror design...

• 2020-07-27

For communication operators, network increment and high speed are the primary issues. At present, operators' backbone networks mainly use 100G transmission systems. In order to meet the traffic demand...

• 2020-07-31

When the fiber core is so small that only light ray at 0° incident angle can stably pass through the length of fiber without much loss, this kind of fiber is called single mode fiber (SMF). The basic ...

• 2020-09-07

Thermal Stripper--- Ideal tool for ribbon fiber splicing work Optical fiber is a light transmission tool based on the principle of total reflection of light in the fiber made of glass or plastic. It i...

• 2020-09-23

The rapid development of photonic technologies has created the need for sophisticated optical products well outside the "telecom standards." User requirements and specifications for these photonic com...

• 2020-10-30

The purpose of using polarization-preserving optical fiber around the loop is to improve the measurement accuracy of the system. Under the condition of the same fiber length and fiber ring diameter, t...

• 2020-11-06

As we all know that fiber cutting is the prerequisite and basis for fiber fusion splicing and fiber endface processing. Conventional communication optical fibers can be processed with ordinary cleaver...