polarization-maintaining(PM) fiber fusion splicer

Categories

New Products

LDC-100 Large Diameter Optical Fiber Cleaver * Applicable to cladding diameter 80μm~1250μm fibers * Vacuum pump V-groove convenient to put fiber * Durable blade, lifetime more than 20000 times * Data storage 4000 groups * User friendly GUI menu, easy to operate more
S-22 Multi-Core Fiber Fusion Splicer The 1st Fully Automatic Multi-core Fiber Fusion Splicer in China more
Polarization Maintaining (PM) Fiber Fusion Splicer S-12 *Suitable for SM/MM/PM fibers splicing * Core to core alignment, low splicing loss * Endview and Profile observation and alignment * Arc automatic calibration and splicing * PM fiber 45 and 90 degree alignment * Applicable to variety fibers splicing, such as Panda ,bow-tie and elliptical fiber more
S-37 LDF Speialty Fiber Fusion Splicer SHINHO S-37 is the latest model we developed, it could splice fiber cladding diameter from 125 to 680μm with low splice loss. We equipped the machine with 3 different fiber holders, and 2 pairs of spare electrodes. more
Core to Core Alignment Fiber Fusion Splicer X900 Six motors fusion splicer, real core to core alignment technology. Typical splicing time: 6-12 seconds, fast splicing 6 seconds Typical heating time: 18s heating, identify fiber types automatically. Typical splice loss:G651: 0.01dB; G652: 0.02dB; G653: 0.04dB; G654: 0.04dB; G.655:0.04dB; G657:0.02dB. Battery Capacity: 5200mAh Li-battery, typical 300 cycles splicing and heating. Used for WAN/ MAN/ Telecommunication projects. more
Robust Multi Function ARC Fusion Splicer S16 76cm dropping anti-shock, IP5X dustproof and IPX2 water resistant Touch screen display, combined with keypad operation Multi function holder for bare fiber, patch cords, drop cable etc. Fast splicing and heating, automatic ARC calibration. more
SHINHO X-18 Ribbon Fiber Thermal Stripper Shinho X-18 Thermal Stripper is a newly developed hand-held thermal stripper, specially designed for nondestructive thermal stripping of the jacket of ribbon cable up to 12 fibers. A good and reliable tool for ribbon fiber splicing work. more
High Precision Fiber Optic Cleaver X-50D Small size& light weight, easy to operate. High precision and stable performance. More than 48000 time blade life,fiber cleaved length 5~20mm. High quality material more

How to calibrate the ARC of polarization-maintaining(PM) fiber fusion splicer

2023-10-27

Arc is a kind of plasma, the shape and stability are affected by many factors, such as electrode rod, temperature, pressure and so on. Although the polarizing fiber welding machine can dynamically adjust the arc power according to the light intensity at the time of welding, the adjustment is based on statistical results, and can not quickly respond to the sudden change of the external environment. In addition, changes in discharge intensity due to electrode wear and fiber debris adhesion cannot be automatically corrected, and the discharge center sometimes moves to the left or right. In this case, the discharge center of the polarization-maintaining fiber welding electrode will shift relative to the position of the fiber welding, and it is necessary to perform discharge correction to solve these problems.
The principle of electrical arc correction for polarisation-maintaining fiber welding is that after the fiber is advanced and cored, the current welding parameter group is used to ablate the fiber, judge the arc power according to the ablative condition of the fiber, and change the discharge current intensity until the test results meet the requirements.

Select manual calibration and enter the video interface Cut and clamp the optical fiber according to the steps of fusing the optical fiber, press the key or the "Execute" key on the screen, the calibration program starts to run and the test result is given. According to this test result, manually set the discharge current in the welding parameters, and repeat the above steps until the calibration is successful on the display page.

Automatic calibration, select automatic calibration, enter the video interface, cut and clamp the optical fiber according to the steps of fusing the optical fiber, press the confirm button, the calibration program starts to run and give the test result. Automatic calibration will automatically change the discharge current in the welding parameters according to the test results. If "arc calibration completed" is displayed, the current current value is the appropriate current value. If "arc is too large or too small" is displayed, the optical fiber is re-prepared and tested again until the test result is displayed as "Arc calibration complete".

Previous :
The Difference Between Optical Fiber Cold Splicing and Optical Fiber Fusion
Next :
What is Fiber-to-the-Home